Joint compound and texture
Taped seams and sprayed or troweled wall texture are sampled where they will be sanded, scraped or removed.
Typical cost in Hawthorne
Walls can hide asbestos in joint compound, texture and plaster layers, not only on their faces. That is why the South Coast Air Quality Management District’s Rule 1403 sends the survey into the cavities of walls and ceilings, wherever sampling is needed to identify the material.
Before a wall is cut, opened or sanded, we sample it. If it tests positive, we remove it from a sealed area with air filtration and bag the waste. New drywall and paint are not part of that job.

Taped seams and sprayed or troweled wall texture are sampled where they will be sanded, scraped or removed.
Plaster gets sampled before demolition, patching or rewiring work opens it up, so the result is known before the first cut.
A new doorway or a cut around an electrical panel opens a wall, so the material at the opening is sampled before the cut.
Removing a wall that carries load counts as demolition in the rule, whether the wall sits in a house or an apartment building, and the survey and the district notice both follow.
The sampling is done by an asbestos consultant or technician, never by the person holding the saw. Please do not take samples yourself.
The survey exemption for less than 100 square feet is only for residential single-unit dwellings, so a wall in an apartment, condo or townhouse needs its survey whatever its size.
Wall debris that tested positive is bagged inside the sealed area and leaves as asbestos waste. In California, friable asbestos waste is treated as hazardous waste.

Next, HVAC duct and pipe insulation removal. The home page covers everything else.
We recommend calling, but do feel free to contact us using this form. We'll get back to you with a free, personalized quote or additional questions as soon as possible. We're here to help.
Call (424) 588-6917